Ⅲ plate claw price is fine-tuning, quality assurance, Hotline:! 18853736667 Hao Bo professional production of fine-tuning the mechanical claw, bi-block sleepers fine-tuning, gauge struts, etc., cheap, quality assurance fine tune claw Also known as regulators, non-ballasted track multi fine tune claw CRTS Ⅱ track plate fine-tuning device, DT-type positioning adjustment claw for high-speed rail line CRTS Ⅱ non-ballasted track plate to fine-tune the horizontal and vertical directions. This product has been in widely used on the Beijing-Tianjin intercity high-speed railway. 1, Ⅲ plate claw uses fine-tune the positioning adjustment type DT is one of a dedicated high-speed railway equipment for CRTS Ⅲ concrete precise adjustment of the track plate. CRTS Ⅲ BALLASTLESS concrete track slab track construction, after the CRTS Ⅲ extensive concrete track slab, the DT-type positioning adjuster plate installed in the specified location on both sides of the track, the track board initially determined position and orbital plate system support. When fine-tune the orbital plate, after the use of measuring instruments detect the error, the application completes fine-tune the positioning adjustment and positioning rail board, including the orbital plate height and lateral adjustment. 2, DT-type positioning adjustments main technical parameters DT-type positioning regulator of A-type and B-type two, supporting the use of: DTA type DTB type Maximum load: 6000 kg 6000 kg height adjustment range: 0 ~ 50mm 0 ~ 50mm horizontal adjustment range: 0 ~ 33mm 0 positioning adjuster weight: 6 kg 5.24 kg each track plate number 31 Use: 4 2